Round hole
Plier to make round cuts to create room for other devices (tractions such as lingual buttons, eyelet, TS2)..
To create a space on a speci c tooth, piace the plier on the lingual side of the aligner, then press to cut.
Tear drop hole
Plier to make a drop cut, useful in treatments where the use of the elastics is required.
Place the plier on the aligner’s edge and press su ciently to cut it. The cut created is an anchor for applying the elastics directly on the aligner.
Rectangular pin
Plier to make a rectangular pressure point on the aligner’s mesial or distal side.
Piace the instrument, mesially or distally, where you want to make the pressure point and press to shape the aligner. Use the lateral key to regulate the depth of the pressure point.
Cylindric pin (1,5 mm)
Plier to make cylindrical pressure points on the aligner’s mesial or distal side.
Piace the instrument, mesially or distally, where you want to make the pressure point and press to shape the aligner. Use the lateral key to regu/ate the depth of the pressure point.
Bite plane
This plier makes bite plans on the aligner. Use the lateral key to regulate the depth of the bite plan.
Heat the plier on a ame before using it. Once heated, place it on the lingual side of the aligner, and press to form the bite plan.
Hard Wire Cutter with Tungsten Carbide Inserts
Specially designed to cut hard wires up to 0.022’’x0.028’’, with tungsten carbide inserts.
Mini Pin & Ligature Cutter in Super Fast High Intensity Steel
Tronchese standard non angolata progettata per tagliare li leggeri. In acciaio inossidabile super rapido, adatta per tagliare li no a 0.016” di diametro.
Distal Cutter with Safety Hold
Tungsten carbide inserts for a more e ective cutting operation together with the holding of the wire chopped pieces. The high-quality steel guarantees a long life of the instrument. Suitable for wires up to 0.022”x 0.028”.
Straight utility, how style
A general utility plier with 3/32” diameter when tips are serrated.
Designed with rounded tips for maximum patient comfort and safety.
Offsetted utility plier, how
A general utility plier similar to the previous one with 3/32’’ and an o set angle of 45°.
Matching serrated tips hold wires rmly. Maximum wire diameter 0.015”.
Band seating plier
Specially serrated tip design ensures the insertion even between the smaller brackets’tie wings, aiding an easy and safe seating of the bands.
Ball hook crimping plier
Designed to crimp auxiliary stops and hooks to archwires. The slotted tip ts over the base of the hook while holding it tight during crimping.
Angled ball hook crimping plier
Designed to crimp auxiliary stops and hooks to archwires. The special design of the tips allows an easy positioning of the auxiliaries even in the mouth’s posterior regions.
Weingart utility plier
A general utility plier featured of tapered tips and of a convenient working angle. Very suitable to access to posterior regions.
Stop (v-bend) plier
Makes 1mm V-Bends on archwires avoiding wire scoring and so no breakage. Works on round arch wires up to 0.020’’.
Universal plier
Wire bending plier. Orthodontists can use this plier in many ways: at pliers, wire cutters, xing pliers.
Three jaw plier
The gradual conic design of the tips allows to bend wires up to 0.030’’.
Bird beak plier
Designed to bend round wire up to 0.030’’. It is provided of one conic and one pyramidal beak.
Light wire plier
Designed to bend round wire up to 0.016’’. The long tapered beaks allow an easy bending even of small diameter loops.
Ligatures forming plier
Ideal for quickly forming metal ligatures.
Detailing step plier
The use of this plier reduces working time. Special double sided o set head forms right hand or left hand step-up or step-down bends without removing the archwire from the slot.
Loop forming plier
Especially designed with concave-convex beaks to make bull and tie loops on rectangular wire up to 0.020’’.
Hollow chop arch forming plier
Special designed to forms and bend with precision round and rectangular wires in a very short time. The smooth and round surface of the beaks allows an easy shaping.
Nance loop forming plier
Beveled edges prevent scoring of wire. Four steps allow precision forming of 3,4 and 6mm loops even on rectangular wires.
Tweed plier
Especially designed to form and bend loops on rectangular wires. Provided with a cylindric tip of progressive diameters (“0.045”; 0.060”; 0.075”) and of grooved a concave beak. It bends wire up to 0.022’’x0.028’’.
Rectangular arch forming plier, tweed style
Used to make o set and bend of 90° on rectangular and square wires up to 0.022’’x0.028’’. The special beaks do not score the wire while working.
Jarabak plier
Ideal for precise bending of lighter wires. Precision grooves ensure accurate bending and closing of loops.
Lingual arch forming plier
Designed to form lingual archwires. Perfect solution even on wire up to 0.036”.
“De la Rosa” plier
To form archwires in every working position.
Grooved “De la Rosa” plier
With grooves to form archwires in every working position.
Grooved laboratory plier
Special laboratory plier used for wires up to 0.045’’.
Young plier
Young plier to form loops of di erent diameters.
Direct bond remover, wide
Designed for an easy removing of the brackets. The wide tips wedge between both edges of the base of the brackets and the tooth.
Posterior band remover
For easier and more comfortable removal of the bands. The removable pad rests on the occlusal side of the molar, and the tip ts under the band. By removing the pad, the instrument is autoclavable.
Mathieu
Provided with a narrow beak it is a solid and simple pliers, perfect to tie and to bend wires. Ideal for elastic ligature and chains placement. Provided with a lock-on handle.
Mathieu hooked tip
Provided with a hooked tip, it is a solid and simple utility plier, perfect to tie elastic and metal ligatures. Provided with a lock-on handle.
Mosquito
Steel hemostatic forceps straight – 12,5 cm.
Separators plier
The beak’s angulations allows an easy placement of the separators. It is special designed to expand and reduce modules for an easier an quick application.
Boone gauge
Useful to check the distance between the bracket’s slot and the incisal tooth edge.
Serrated tweezer
Curved tweezer
Buccal tube tweezer
Buccal tube long tweezer
Lingual tweezer
Arch-forming turret torque 0°
Escavatore
Twirl-on instrument
Elastics director
Utility instrument
Probe
IPR
The IPR Gauge is an autoclavable stainless steel instrument used during Interproximal Reduction (IPR) to measure space. The IPR Set includes 6 gauges: 0.1 mm, 0.2 mm, 0.25 mm, 0.3 mm, 0.4 mm, and 0.5 mm. Autoclavable at 120°C – 30 min.
Band pusher
Up to 250°F/125°C high temperature resistance. Special designed for an easy access to the second molar and with grooves to better eliminate the occlusal interference problem and so reducing the risk of abrasion for patients.
Band pusher
Aluminum band pusher with stainless steel tip; a precise and versatile tool for the band positioning and modeling procedure. The tip design, studied to modify the bands in the intercuspid grooves, allows shaping the less precise edges, making the band adherent to the tooth’s anatomy. The rubber cap protects the patient from abrasion and is removable and autoclavable.
Mershon band pusher
Handy and lightweight, it allows easier positioning of the bands.
